Non destructive testing - La Spezia (Italy)
Radiographic and gammagraphic inspections (RT)
Radiographic and gammagraphic inspections are methods of non-destructive tests that use ionizing radiation in order to verify the integrity of pieces or parts of them. This is done by the radiography of the affected area that is the projection of the piece image on the film...
Details
Ultrasonic test and thickness measurements (UT)
Ultrasounds are elastic waves (or mechanical vibrations ) which spread in the materials with a stated velocity depending on material characteristics and on kind of wave used. As well as the light, ultrasonic waves may undergo reflections, refractions, diffractions , diffusions...
Details
Magnetic particles inspection (MT)
The magnetic particles inspection allows to detect the presence of surface and sub-surface ( a few millimeters) discontinuities inside of ferromagnetic materials by exploiting the phenomenon of ferromagnetism .Consequently to the magnetization of the piece, induced by the...
Details
Penetrant test (PT)
The penetrant test (PT) generally consists in the use of a red liquid with particular characteristics of viscosity and capillarity named “dye penetrant” and another white coloured called detector that allow the detection of defects opening on the surface of ferrous and...
Details
Visual inspection (VT)
The visual inspection is an essential method to ensure a high quality standard of the product. You can get useful information about the quality of the surfaces examined , their geometry , the finish, the presence of wear, corrosion , etc . as well as on the presence of visible...
Details
Leak detection (LT)
The leak detection, performed using vacuum box equipment, is essential to check for leaks or defects extended trough the tickness of components such as welding of open tanks that can not be pressurized directly and vessels. After applying a special liquid like soapy water on...
Details
Chemical tests “on site” (XRF – OES)
Chemical tests “on site” have the big advantage to perform the analysis with great versatility and speed directly at the customer site . For this purpose can be used XRF equipment (PMI – Positive Alloy Material Identification) for a generally qualitative...
Details
Ferrite content analisys
The ferrite content analisys is performed on austenitic or duplex steels in order to determine, by magnetic induction, the ferrite contained amount . This test is normally required because a too high percentage of the same could create problems of metallurgical...
DetailsAbout Us
SIDER C.N.D. is a service company that is engaged in execution of non-destructive tests of welds, castings, forgings, rolled and other in the marine, carpentry, chemical and petrochemical industry either in yard, by the use of authorized vehicles for the transport of radioactive material or in workshop within their bunkers.
Certifications
SIDER C.N.D. work with qualified personnel in non-destructive testing according to EN ISO 9712, SNT-TC-1A and in accordance with Directive PED 97/23/CE
Contact
 |
Via XXV Aprile, 144 19021 Arcola (SP) – Italy Tel. : +390187952340 Fax : +390187943198 Cell. 1 : +393477828920 Cell. 2 : +393477816278 |
 |
sider_cnd@libero.it |
For estimates we kindly ask you to call us.
To request information about our services, please write to the mail above.